Prateek Gupta

PhD student WP2 (2018–2021)

Supervisor: Prof. Sverre Steen (NTNU)

Co-supervisor: Prof. Adil Rasheed (NTNU, SINTEF)

CV NTNU

CV LinkedIn

PhD - Ship performance monitoring and optimization using in-service measurements and big data analysis methods

Research topic

The focus of the project would be to convert the highly dimensional in-service measurement data recorded onboard a ship into meaningful information. Initially, data integrity and quality assurance procedures must be implemented and applied on the data set(s). The cleaned data will be further used to quantify the hydrodynamic performance of the ship. The project will apply big data analysis, data science, and machine learning for data processing. The in-service data will be linked with environmental data from open sources, like for instance NorKyst800 and ECMWF to improve the ability to detect the environmental condition.

Topics like prediction of ship speed loss, speed-powering variation, hull-propeller performance, seakeeping performance, influence of environmental factors will be covered under the hydrodynamics aspect of the project.

Industrial goal

  • Monitor and optimize the hydrodynamic performance of a ship using in-service measurements from onboard installed sensors.
  • Estimation of frictional resistance of the ship from total engine power consumption and ship motions using in-service measurements.
  •  Estimation of added wave resistance using weather hind-cast data, ship motions and total engine power consumption during voyage

Scientific questions

  • How to quantitatively represent the hydrodynamic performance of a ship using in-service measurement data?
  • How to separate calm water resistance from the total resistance?
  • How to convert large amount of sensor data into small number of meaningful hydrodynamic performance parameters?
  • How to identify the frictional resistance from the measured total engine power consumption?
  • How to estimate sea state and speed-through-water in real time?